Hot Rolled Steel Rebar Iron Deformed Steel Bar Rod For Building Construction
Rebar (Reinforcing Bar) is a ferrous steel deformed bar which is used for reinforcement, strengthening & holding concrete. It is usually formed with a surface which is patterned (known as a deformed bar) to make a better adherence with the concrete spilled around it. No specific or special patterns are there for deforming, however, the number, spacing, and the height of the marks are standardized and integrated into the primary debar. In addition, there are plain bars which are used in the most specific and definite ways, only.Owing to the fact that rebar holds the concrete in a compact state, it is known as a tensioning material. when it comes into the compression, concrete is a very tough and strong material, but it almost has no strength where it comes to carrying tensile loads. To overcome this, rebar casts in concrete to carry the loads.
Steel Rebar Specification:
| Product Name | Steel Rebar,Rebar,Deformed Steel Bar,Ribbed Steel Bar |
| Material | Q235, Q355; ASTM A53 GrA,GrB; STKM11,ST37,ST52, 16Mn |
| Size | 6mm,8mm,10mm, 12mm, 13mm, 14mm, 16mm, 20mm, 22mm, 25mm, 30mm, 32mm, 40mm,50mm |
| Length | 5m-12m,5.8m,6m,10m-12m,12m or as customer's actual reques |
| Standard | BS4449,GB1449.2,JIS G3112, ASTM A615 A615M |
| Grade | Grade40/60/75
BS 4449 460B/500B
GB HRB335 HRB 400 HRB 500
JIS SD390 |
| Section Shape | Spiral Shap,Herringbone Shap,Crescent Shap |
| Technique | hot rolled ribbed, prestressed |
| Packing | Bundle or as your requirements |
| Origin | China |
| | Chemical Composition
(%)≤ |
| C | Si | Mn | P | S | Ceq |
| HRB 335 | 0.25 | 0.80 | 1.60 | 0.045 | 0.045 | 0.52 |
| HRB 400 | 0.25 | 0.80 | 1.60 | 0.045 | 0.045 | 0.54 |
| HRB 500 | 0.25 | 0.80 | 1.60 | 0.045 | 0.045 | 0.55 |
| | Diameter /mm | Yield strength/MPa | Tensile strength /MPa | Elongation(%) |
| ≥ |
| HRB 335 | 6~25 28~50 | 335 | 490 | 16 |
| HRB400 | 6~25 28~50 | 400 | 570 | 14 |
| HRB 500 | 6~25 28~50 | 500 | 630 | 12 |
Steel Rebar Features:
Rebar is a steel bar with ribs on the surface, also known as ribbed steel bar, usually with 2 longitudinal ribs and transverse
ribs evenly distributed along the length direction The nominal diameter of a ribbed steel bar is equivalent to the nominal diameter of a smooth round steel bar of equal cross-section. The nominal diameter of the steel bar is 8-50 mm, and the recommended diameters are 8, 12, 16, 20, 25, 32, 40 mm. Ribbed steel bars are mainly subjected to tensile stress in concrete
Steel Rebar Application:
Rebar is widely used in civil engineering construction such as houses, bridges and roads. As large as public facilities such as
highways, railways, bridges, culverts, tunnels, flood control, dams, etc., as small as foundations, beams, columns, walls, and panels of house construction, rebar is an indispensable structural material
Product Tags:
|
|
Hot Rolled Steel Reinforcement Rebar Iron Deformed Steel ODM Images
|
